Lithofin KF Cement Residue Remover 1L
Explore Range
Product Description
The final clean after grouting. Lithofin KF Cement Residue Remover is an acidic concentrate that dissolves the grout haze, cement and mortar residue left on a newly tiled floor, along with rust, limescale and most efflorescence, and rinses away without leaving a film of its own.
Dilute it about 1:4 with water (up to 1:15 for a light cement veil), spread it over the pre-wetted floor with a scrubbing brush or mop, leave it about 10 minutes, then brush and rinse well. One litre of concentrate covers roughly 20 to 30 m2.
For acid-resistant ceramic and porcelain, quarry tiles, clinker, brick and terracotta, indoors and out. It is low in odour, so it suits indoor work. Do not use it on marble, limestone or other acid-sensitive stone, enamel, zinc or anodised metal: protect them and wash off any splashes.
Made in Germany by Lithofin. 1 Litre bottle with a child-resistant cap.
| Coverage | 20-30 m2 per litre |
| Suitable for | Ceramic, Porcelain, Quarry tile, Terracotta, Clinker, Brick |
| Pack size | 1 Litre |
| Made in | Made in Germany |
Specifications
| Product | |
| Brand | Lithofin |
| Product type | Grout Haze Remover |
| Format | Bottle |
| Performance | |
| Coverage | 20-30 m2 per litre |
| Application | |
| Suitable surfaces | Ceramic, Porcelain, Quarry tile, Terracotta, Clinker, Brick |
| Not suitable for | Marble, limestone and other acid-sensitive stone, some decorative tiles, enamel, zinc, anodised metal and wood. Protect adjacent areas and wash off splashes. |
| Where to use | Indoor, Outdoor, Floor, Wall |
| How to apply | Dilute about 1:4 with water (up to 1:15 for a light cement veil). Apply to the pre-wetted surface with a scrubbing brush or mop, brush through and rinse well with water. Treat stubborn spots neat or repeat. |
| Dwell time | About 10 minutes, then brush and rinse |
| Composition & safety | |
| Base | Acidic concentrate (pH under 1) |
| Flammable | No |
| Shipping restriction | Dangerous goods: UN 1760 corrosive liquid, Class 8, packing group II. Road freight only - cannot be sent by air. |
| Pack & documents | |
| Pack size | 1 Litre |
| Also available in | 1 L, 5 L (Design Tiles stocks 1 L) |
| Net weight | 1.18 kg |
| Product code | LF110-1L |
| Technical bulletin | Download PDF |
| Safety data sheet | Download PDF |
Test first. Always test an inconspicuous area or a spare offcut first to confirm ease of application, the number of coats needed, colour stability and the result you want. The end user must determine the product's suitability for their own surface.
Coverage varies. Published coverage is a guide. Actual coverage varies with the density, porosity, texture and absorption of the surface, plus weather, application method and the number of coats.
Coverage, dwell and cure times are the manufacturer's published figures and vary with the density, porosity and texture of the surface. Always test an inconspicuous area first.
Not sure which one you need? Tell us the surface and the look you are after and we will match the right sealer, cleaner and applicator.