Spray'N'Seal Natural Look Aerosol Sealer
- Australian made
Pairs Well
Product Description
Spray'N'Seal handles the jobs a bottle and applicator make awkward - a splashback, a shower niche, a run of grout lines, a mosaic feature wall. Aim, spray, wipe.
Same natural-look, non-yellowing protection as the bottled sealers, using Nano-AQS and Rapid-Seal C6 Fluoro for stain resistance in about four hours. It stays breathable, and works on porous stone, tile, mosaics, grout, glass and timber.
Hold the can 30-40 cm away and spray in slow, even sweeps. Wipe off any overspray straight away - never let it dry on the surface.
450ml aerosol. Road freight only, so we cannot send this one by air.
| Finish | Natural look - non yellowing, non coating |
| Suitable for | Natural stone, Porcelain, Ceramic, Mosaics, Grout, Glass, Canvas, Timber |
| Pack size | 450ml |
| Full cure | Keep dry 24-48 hours |
| Made in | Australian made and owned |
Specifications
| Product | |
| Brand | Sealers Plus |
| Product type | Sealer |
| Grade | Professional grade |
| Format | Aerosol |
| Finish | Natural look - non yellowing, non coating |
| Technology | Nano-AQS with Rapid-Seal C6 Fluoro |
| Performance | |
| Coats recommended | 2 or more on porous surfaces |
| Stain resistance from | Stain resistance in 4 hours |
| Light traffic after | 2 hours |
| Full cure | Keep dry 24-48 hours |
| Application | |
| Suitable surfaces | Natural stone, Porcelain, Ceramic, Mosaics, Grout, Glass, Canvas, Timber |
| Not suitable for | The underside of tile or stone |
| Where to use | Indoor, Outdoor, Floor, Wall |
| How to apply | Aerosol - spray 30-40 cm from the surface in slow even sweeps |
| Between coats | 30 minutes |
| Surface temperature | 4-28 C surface temperature |
| Composition & safety | |
| Base | Aerosol with hydrocarbon propellant |
| Safe for food areas | Yes - non toxic, suits food preparation and serving areas |
| Flammable | Yes - contains heptane |
| Shipping restriction | Aerosol. Road freight only - cannot be sent by air. |
| Pack & documents | |
| Pack size | 450ml |
| Net weight | 0.5 kg |
| Product code | 155-450 |
| Technical bulletin | Download PDF |
| Safety data sheet | Download PDF |
Test first. Always test an inconspicuous area or a spare offcut first to confirm ease of application, the number of coats needed, colour stability and the result you want. The end user must determine the product's suitability for their own surface.
Not a waterproofing agent. A penetrating sealer is not a waterproofing membrane. It will not prevent surface wear, scuff marks, or etching from acidic or harsh products. Wipe spills up promptly to minimise staining.
Re-seal as necessary. Sealer life depends on traffic, surface hardness and how the area is cleaned. Pressure washing and high-alkaline, acidic or solvent cleaners shorten it. High-traffic and outdoor areas need re-sealing more often.
Aerosol - road freight only. This product is a pressurised aerosol containing a hydrocarbon propellant. It cannot be sent by air freight and may take longer to reach remote areas. Store below 30 C, away from heat and direct sunlight.
Coverage, dwell and cure times are the manufacturer's published figures and vary with the density, porosity and texture of the surface. Always test an inconspicuous area first.
Not sure which one you need? Tell us the surface and the look you are after and we will match the right sealer, cleaner and applicator.