Mapei Ultracolor Plus Grout 5kg
Pairs Well
Product Description
Mapei Ultracolor Plus is the grout most Sydney tilers reach for when the job has to be finished and walked on the same day. It sets fast, takes light foot traffic after about three hours, and handles joints from 1.5 to 20 mm - so the same bag does a mosaic splashback and a large-format floor.
Two Mapei technologies do the work that matters six months later. DropEffect makes the joint water-repellent, so spills sit on the surface instead of soaking in. BioBlock resists the mould that turns bathroom grout black.
Supplied in 5 kg bags across 17 colours, from 100 White to 143 Terracotta. Mix 0.25-0.30 litres of water per kilogram and use within about 30 minutes.
| Coverage | Approx. 1.5 kg/m2 at a 5 mm joint; varies with tile format and joint depth |
| Joint width | 1.5 - 20 mm |
| Set to foot traffic | Light foot traffic after approx. 3 hours |
| Classification | EN 13888-1 CG2FWA — fast-setting, reduced water absorption, high abrasion resistance |
| Made in | Made in Italy by Mapei |
Specifications
| Product | |
| Brand | Mapei |
| Product type | Grout |
| Format | Bag |
| Technology | BioBlock anti-mould, DropEffect water-repellent |
| Classification | EN 13888-1 CG2FWA — fast-setting, reduced water absorption, high abrasion resistance |
| Performance | |
| Coverage | Approx. 1.5 kg/m2 at a 5 mm joint; varies with tile format and joint depth |
| Joint width | 1.5 - 20 mm |
| Pot life | 20-30 minutes |
| Light traffic after | Light foot traffic after approx. 3 hours |
| Ready for use | Ready for use after 24 hours; 48 hours before water immersion |
| Application | |
| Suitable surfaces | Ceramic, Porcelain, Glass, Clay, Stone, Slate, Granite |
| Where to use | Bathroom, Kitchen, Laundry, Floor, Wall, Outdoor, Pool surrounds |
| Mixing ratio | 100 parts powder to 20-26 parts water, depending on the colour |
| Surface temperature | Apply between +5 and +35 degrees C |
| Not suitable for | Not for movement joints, internal corners or the wall-to-floor junction - use Mapei Mapesil AC silicone in the matching colour. Allow 48 hours before water immersion. |
| Composition & safety | |
| Base | Polymer-modified cementitious mortar, free from Portland cement |
| VOC | Very low emission of volatile organic compounds; greenhouse gas emissions fully offset |
| Pack & documents | |
| Also available in | 2 kg, 5 kg, 10 kg, 20 kg (Design Tiles stocks 5 kg) |
| Net weight | 5.0 kg |
| Product code | 6013105 |
| Technical bulletin | Download PDF |
| Safety data sheet | Download PDF |
Coverage, dwell and cure times are the manufacturer's published figures and vary with the density, porosity and texture of the surface. Always test an inconspicuous area first.
Not sure which colour? Tell us the tile and we will help you pick a grout that either disappears into the joint or deliberately frames it.