Enhance'N'Seal Colour Enhancing Sealer
- Australian made
Pairs Well
Product Description
Some stone only shows its real colour when it is wet. Enhance'N'Seal keeps it that way - a penetrating sealer and colour enhancer in one, with 100% active solids that deepen the veining and movement in tired stone, then seal it against oil, food and grime.
The look is rich but matt: no sheen, no surface film. Use it on natural stone, terrazzo, encaustics, concrete, pavers and grout, indoors or out, including benchtops.
One litre covers 8-40 m2 per coat, two coats recommended, 48 hours to cure.
Colour enhancing is permanent, so test an offcut or a hidden corner first.
| Coverage | 8-40 m2 per litre per coat |
| Finish | Colour enhancing - darkens and enriches, no sheen |
| Suitable for | Natural stone, Porcelain, Encaustic, Terrazzo, Concrete, Pavers, Grout, Terracotta |
| Pack size | 1 Litre, 250ml, 4 Litre |
| Full cure | 48 hours |
| Made in | Australian made and owned |
Specifications
| Product | |
| Brand | Sealers Plus |
| Product type | Sealer |
| Grade | Professional grade |
| Format | Bottle |
| Finish | Colour enhancing - darkens and enriches, no sheen |
| Technology | NanoPlus with Poly Seal, 100% active solids |
| Performance | |
| Coverage | 8-40 m2 per litre per coat |
| Coats recommended | Minimum 2 |
| Light traffic after | 2 hours |
| Full cure | 48 hours |
| Application | |
| Suitable surfaces | Natural stone, Porcelain, Encaustic, Terrazzo, Concrete, Pavers, Grout, Terracotta |
| Not suitable for | The underside of tile or stone - use a dedicated six-sided sealer |
| Where to use | Indoor, Outdoor, Floor, Wall, Benchtop, Facade |
| How to apply | Sealer applicator, sponge, brush, roller or paint pad |
| Dwell time | 10-15 minutes, then wipe completely dry |
| Between coats | 30 minutes minimum |
| Surface temperature | 4-32 C surface temperature |
| Composition & safety | |
| Base | 100% active solids |
| VOC | Low VOC |
| Safe for food areas | Yes - safe for food preparation areas |
| Flammable | No |
| Pack & documents | |
| Pack size | 1 Litre |
| Net weight | 1.13 kg |
| Product code | 160-001 |
| Technical bulletin | Download PDF |
| Safety data sheet | Download PDF |
Test first. Always test an inconspicuous area or a spare offcut first to confirm ease of application, the number of coats needed, colour stability and the result you want. The end user must determine the product's suitability for their own surface.
Coverage varies. Published coverage is a guide. Actual coverage varies with the density, porosity, texture and absorption of the surface, plus weather, application method and the number of coats.
Not a waterproofing agent. A penetrating sealer is not a waterproofing membrane. It will not prevent surface wear, scuff marks, or etching from acidic or harsh products. Wipe spills up promptly to minimise staining.
Re-seal as necessary. Sealer life depends on traffic, surface hardness and how the area is cleaned. Pressure washing and high-alkaline, acidic or solvent cleaners shorten it. High-traffic and outdoor areas need re-sealing more often.
Colour enhancing is permanent. A colour enhancing sealer darkens and enriches the surface permanently. Once enhanced, a surface cannot be returned to its original appearance. Test an offcut or a hidden corner before committing to a whole floor.
Coverage, dwell and cure times are the manufacturer's published figures and vary with the density, porosity and texture of the surface. Always test an inconspicuous area first.
Not sure which one you need? Tell us the surface and the look you are after and we will match the right sealer, cleaner and applicator.