

















































Kerakoll Fugabella Color Grout 3kg
Product Description
Fugabella Color is Kerakoll's resin-cement grout for porcelain, ceramic, glass mosaic and natural stone, in joints from 0 to 20 mm. It mixes with water like a cement grout but sets harder, repels water and resists bacteria and mould (ISO 846, methods A, B and C), so joints stay clean in showers, kitchens, laundries and outdoor areas.
It comes in 50 colours, each named by its Kerakoll KK code, with the old Kerakoll number after the slash where there was one (KK151 / 30 was colour 30). Silicone Color carries the same KK codes for corners and movement joints, and Neutro Color does the same job on marble and natural stone.
Each 3 kg bag takes 0.7 to 0.8 litres of water. Foot traffic after about 3 hours, normal use after 24 hours and swimming pools after about 3 days. Classified CG2 WA to ISO 13007-3, approved for marine use, and CATAS-tested for colour durability outdoors.
| Coverage | Depends on tile size and joint: approx. 190 g/m2 for 600 x 600 x 10 mm tiles with a 3 mm joint, 1.71 kg/m2 for 20 x 20 mm mosaic with a 3 mm joint (Kerakoll coverage table) |
| Joint width | 0 - 20 mm |
| Set to foot traffic | Foot traffic after approx. 3 hours (10 hours at 5 degrees C) |
| Classification | ISO 13007-3 CG2 WA |
Specifications
| Product | |
| Brand | Kerakoll |
| Product type | Grout |
| Format | Bag |
| Technology | Water-repellent, resists bacteria and mould (ISO 846 A/B/C), approved for marine use |
| Classification | ISO 13007-3 CG2 WA |
| Performance | |
| Coverage | Depends on tile size and joint: approx. 190 g/m2 for 600 x 600 x 10 mm tiles with a 3 mm joint, 1.71 kg/m2 for 20 x 20 mm mosaic with a 3 mm joint (Kerakoll coverage table) |
| Joint width | 0 - 20 mm |
| Pot life | 45 minutes or more at 23 degrees C (30 minutes at 35 degrees C) |
| Light traffic after | Foot traffic after approx. 3 hours (10 hours at 5 degrees C) |
| Ready for use | Ready for normal use after approx. 24 hours; swimming pools after approx. 3 days |
| Application | |
| Suitable surfaces | Porcelain, Ceramic, Thin porcelain slabs, Klinker, Cotto, Glass mosaic, Natural stone, Marble, Engineered stone |
| Where to use | Bathroom, Kitchen, Laundry, Floor, Wall, Outdoor, Swimming pools, Underfloor heating |
| Mixing ratio | 0.7 - 0.8 litres of water per 3 kg bag |
| Surface temperature | Apply between +5 and +35 degrees C |
| Not suitable for | Not for joints wider than 20 mm, expansion or movement joints, or where specific chemical resistance or zero water absorption is needed (use Fugalite Color). Seal internal corners and wall-floor junctions with Kerakoll Silicone Color in the same KK code. |
| Composition & safety | |
| Base | Pre-mixed decorative resin-cement |
| VOC | Low VOC emission (Kerakoll GreenBuilding Rating 4) |
| Pack & documents | |
| Also available in | 3 kg bag in 50 colours (Kerakoll also makes a 20 kg bag) |
| Net weight | 3.0 kg |
| Product code | 100010 |
| Technical bulletin | Download PDF |
| Safety data sheet | Download PDF |
Test first. Always test an inconspicuous area or a spare offcut first to confirm ease of application, the number of coats needed, colour stability and the result you want. The end user must determine the product's suitability for their own surface.
Coverage varies. Published coverage is a guide. Actual coverage varies with the density, porosity, texture and absorption of the surface, plus weather, application method and the number of coats.
Coverage, dwell and cure times are the manufacturer's published figures and vary with the density, porosity and texture of the surface. Always test an inconspicuous area first.

Not sure which colour? Tell us the tile and we will help you pick a grout that either disappears into the joint or deliberately frames it.










































































































































